Cleaning Your Welding Helmet Lens the Right Way

As An Amazon Associate I Earn From Qualifying Purchases

It is without a doubt that one does not want to spend a lot of money on buying a new welding helmet from time-to-time only for the reason of it being damaged because of dirt.

It may seem like a small thing, but maintaining your welding helmet free from all sorts of stain will spare you unnecessary expenses. Aside from it being a practice of general hygiene, helmet cleaning is important for a variety of reasons.

First of all, it guarantees that your equipment(weld requirement) is in proper condition, which assures you that it has the ideal quality to keep your head, face, and respiratory system safe along with the different welding processes like stick, TIG and MIG welding. There are some things that might help you  how to clean welding helmet lens 

No matter what kind or style of boot you’re looking for, we’ve got some great options here that’ll meet your needs with flying colors too.

Important Things to Remember When Cleaning Welding Helmet Lenses

  1. Different kinds of welding helmets are made of different materials so that they may require different cleaning procedures. It is helpful to read the manual firsthand before continuing with the washing process. Some welding lenses can be easily scratched, and we do not want that because it makes the lenses less clear.
  2. See to it that you have removed the batteries from a battery-powered welding helmet before washing it. After all the washing is done, make sure to replace the batteries with a new one in order to assure the helmet’s excellent function. Not being able to do so may damage the equipment’s performance and effectiveness.
  3. Be extra cautious around the battery area when brushing a solar-powered welding helmet. Batteries used in this kind of helmet are more expensive than those in ordinary ones, so we do not want more expenses to waste their batteries.
  4. When cleaning a multi-layered welding helmet lens, make sure to remove each section for thorough brushing carefully. Failure to do so may result in tiny dirty being left behind, which may cause future problems.
  5. When using a microfiber towel, see to it that you are using a thin one because the thick ones may scratch the lens. And speaking of scratch, be extra cautious in cleaning a coated lens because even slight scratches may remove the coating.

What’s a welder without welding gloves? They’re the perfect accessory for all types of metalwork.

Things you may need in cleaning your welding helmet lens

Cleaning Wipes

There are varieties of cleaning wipes available in the market, but you have to use the right type of wipes with the appropriate materials to make sure it won’t scratch your welding helmet lens or leave excess fibers.

One of the best cleaning wipes is the Care Touch Cleaning Wipes that is already pre-moistened and individually-wrapped, so you do not have to go through the hassle of wetting it with water or pulling the wipes one-by-one.

Plain room temperature water

There is nothing else better at removing dirt than the universal solvent, which is water. It is probably the most basic welding lens cleaner. Make sure that your water is not too cold that it makes the dirt freeze and harder to remove, or too hot that it damages the lens itself.

Helmet Spray

Aside from keeping your helmet free from dirt and stain, one of the most important personal equipment qualities is its safety and freedom from germs and microbes.

Using a helmet cleaner spray will not only keep your welding helmet clean, but it is also an ideal disinfectant and deodorizer.

Brush and Buffing Wheel

A brush with smooth bristles is probably the most ideal one for the job since we do not like getting scratches on the helmet lens. The buffing wheel is specially designed to smooth and brighten a metal or wood surface.

Have you been looking for welding gloves reviews? Check out these top-rated options below!

Clearance Process

We want to make sure that we are taking care of our welding helmets the right way. Sometimes, we may assume that we are only cleaning and maintaining them without being aware that we are doing it wrong, causing further problems and, worst, damaging the helmet.

So let me walk you through the steps on how to clean your welding helmet properly.

STEP 1. Wipe the surface.

Before proceeding to the actual cleaning process, gently wipe the whole surface of the welding lens with the cleansing wipes to remove potential dust or debris. If cleaning wipes are not available, welder can use a simple piece of wet tissue or soft cloth as an alternative.

STEP 2. Detach the cover lens from the helmet.

We do this to make sure that no dirt or debris will be left on narrow spaces. Soak the cover lens in hot water mixed with a household detergent that is not harmful, preferably mild, overnight.

It will make the following cleaning steps easier by initially breaking down the blotches and blemishes on the lens.

STEP 3. Scrub the surface.

This step must be done gently and with extra care because the helmet lens is fragile. Also, keep in mind to hold the lens from the sides, not on the direct surface because it may cause scratches or breaking.

Use a soft-bristled brush to work off the grease and small sediments that may not be fully visible to the eye. Make sure to scrub the most hidden parts thoroughly to ensure complete clean. Rinse the lens with room temperature water. Let it dry.

Ever welded without a mask? It’s like sucking in smoke from the filter of your cigarettes.

STEP 4. Use a buffing wheel.

This is an additional step if you want to witness a more excellent outcome for your welding helmet lens. Use a buffing wheel that is ideal for flat or curved surfaces to remove stiff dents and scratches by attaching a soft wheel to a buffing machine.

Run the buffer and then add a hint of buffing compound to improve the efficiency of the wheel. Gently attach the lens to the buffing wheel without pressing too hard. After the buffer slowly works check out the blemishes on the lens, you will see greater visibility of the arc.

STEP 5. Disinfect your welding helmet.

Using a helmet cleaner spray, disinfect the whole body of the welding helmet to ensure that you do not just have a clear lens for welding hood, but it is also free from germs and without any foul smell and odor.

Seeking the best welding equipment online? Check out this site.

Being familiar and knowledgeable about your welding helmet is essential in the cleaning process. Knowing the right kind of cleaning equipment and tools for the specific sort of your welding helmet, considering its materials and components, will help maintain your helmet in a suitable condition so it can last for an extended period of time.

To expect the good cleaning results, always go for recommended and quality products when choosing what tools you will use in sanitizing.

Welding causes smoke, dirt, and scratches to ruin the view through your helmet. See to it that you are not causing further problems by neglecting your helmet and letting it get ruined by debris that has already settled on it.

Welders can maintain their helmet’s quality by wiping it down after every use and correctly storing it in a bag.

Do you work in a forge? Welding gloves are an essential piece of equipment for any skilled metalworker.

Verdict

Cleaning a welding helmet is technically accessible. It only requires a couple of wiping and brushing.

So do not slack off and spare some minutes out of your day to clean your welding helmet, because it is worth it compared to the future damage it might cost the welder when they neglect taking care of it.