The welding helmet settings are as important as selecting the right helmet for you. Welders are always looking for safety helmets that are easy to adjust.
In today’s world, auto-darkening welding helmets are the most preferred choice of welders. These helmets are comparatively widely used and are set up by following a few easy steps.
In this, we’re going to discuss about auto-darkening welding helmets setting. Moreover, to enhance your knowledge regarding welding helmet, things needed to look into a safety welding helmet will also be discussed. So, let’s read on.
How to Properly Set An Auto-Darkening Welding Helmet
Welding helmets are like a blessing and a precious gift for the welders. It’s the best safety gear that provides protection to the face and eyes and produces significant results both at the same time.
Before you use an auto-darkening welding helmet, you must know about it settings. Without knowing the settings, you won’t be able to use it. Auto-darkening welding helmets are more in use than passive helmets; we’ll discuss rightly setting an auto-darkening welding helmet.
Wondering how to set the auto-darkening welding helmet?
Well! This welding helmet consist of lenses whose prime function is to protect against UV rays emitted during the welding process. Most of the auto-darkening helmet fittings are used for different nature of welding and different light levels produced by the welding arc.
Here are the five steps for adequately setting the auto-darkening welding helmet that ensures that you remain protected without interrupting your work.
1. Adjust the Lens Delay Time
The first step is to adjust the helmet on a clean and clear surface. Since the auto-darkening helmet is an adjustable welding helmet, it quickly gets fit on the surface.
Now, slightly lift the helmet from the front and check the batteries. Make sure the batteries are in place. The positive and negative terminal faces the right battery face because if not, then the helmet won’t function.
Adjust the lens delay time, which means the amount of light that the lens takes to change the dark side to a bright light one. You can also adjust the delay time by pushing a switch present on the welder helmet glass’s inner side.
As there are several subcategories of the auto-darkening helmet, the delay time can be adjusted according to the helmet type.
Usually, the delay time is changed from 0.25 to 0.35 seconds on a fast setting and .6 to .8 on a slower setting. Here it is important to note that delay time is a personal preference; it will be useful if you set it according to your need.
2. Adjust the Shade Setting
The knob is present on the left side of the helmet. The adjusting knows the welder adjusts the intensity of darkness on the welding level they are working on.
3. Adjust the Fixed Shade
It’s recommended welders must always use fixed shade, i.e., darkest shade. When you’re satisfied with the shade settings, wear the helmet and check the headband’s fitting.
If the headband is loose, so tighten it up because this might harm your face and neck and if it’s too tight, then lose it as it causes you significant discomfort.
4. Adjust the Glass
Set the lens is a vital part of the welding helmet settings. Adjust this in a way that the welder views the welding pieces without any blurred vision. Besides setting the lens, also test it.
If the welder helmets glass is properly fit, then it will darken no matter if your head is facing the welding arc. If it isn’t, then don’t start working as it can cause harm to you. Take it to an expert to fix the issue, and start using it.
5 Fixed the Memory Functionality
The auto-darkening welding filters offers the users to record the pre-selected preferences related to your adjustments control. It is because you can activate them soon; the welding process begins.
The memory function is for all three primary controls of the auto darkening helmets. It includes delay adjustments, light sensitivity, and adjust the shade.
This functionality is time-friendly and saves much of the welders’ time. It is known to make the entire welding process convenient without making adjustments every time you start the welding processes.
If you use various welding methods in a different working environment, you must manually adjust the control settings and keep multiple functionality sets in your ADF memory.
Choosing the Right Welding Helmet
Selecting the right helmet for you is indeed very important, but undoubtedly it’s not an easy task as it sounds. It not just fulfills your working requirements but also allows you to control the welding helmet feature settings.
There are several essential points you must consider while selecting the right helmet for you. Among all, we have gathered the four most important equipment that you shouldn’t neglect while choosing it. Let’s find out more about these things.
1. Lens Style
Before using welding helmet, choose the most appropriate lens style for you. There are mainly two types.
These helmets are the conventional welding helmet and possess a shade ten dark lens. You see everything dark when your helmet faces a downward position and won’t switch the light until you put off your helmet. This is one of the most significant drawbacks of passive helmets, and this is why it has complicated settings.
It possesses an auto-darkening lens that changes its shade according to the need of the welder. The best thing about these shade lenses is they are easily adjustable, and the welders don’t need to put off the helmet. It means it allows the welder to produce with high quality work with no interruptions.
2. Helmets Weight
Before you purchase welding helmet, check its weight. Heavy helmets causes fatigue and pain in your neck. Welders who work without any breaks feel exhausted and uncomfortable with the helmets weight. Thus, always go with a light weighted helmet.
The welding helmets that have plastic shells are lightweight. They also have pivot shaped bands that balance helmets weight and provide comfort to the welders. Its don’t cause any stress or injuries to the user, so they’re highly recommended for usage.
Sensitivity is yet another vital element while selecting the right helmet for you. Sensitivity determines the light required to darken the welding filter. Interestingly enough, auto-darkening helmets allows the users to adjust this sensitivity according to their weld requirements.
4. Viewing Area
Always select a welding helmet that has a broad viewing area. A large viewing area offers a more transparent and visible welding area.
The Bottom Line
Most of the people believe that setting up a welding helmet is tough. It isn’t if you have an auto-darkening welding helmet. This is much easier to set and use. Follow the steps mentioned above and make your welding experience comfortable. Secondly, do your homework before buying it.
There’s tons of information regarding the selection of the welding helmets. Don’t get into words quickly. Check out if they have all those highlighted above and make your decision wisely.